Question about trunking with other switch

  • 1
  • Question
  • Updated 2 years ago
Hello,

I am now designing a cumulus switch now which need to config with following requirement:

- swp 1 - Connecting to PC with port access 400
- swp 2 - Connecting to PC with port access 400
- swp 48 - Trunk port connecting to another switch
- Allow traffic within same VLAN is allow between swp1 & swp2
- Allow VLAN 1, 400 traffic in/out with whole network via trunk port (swp48)

Does following config is correct I should do more modification?

-----
auto bridge
iface bridge
     bridge-vlan-aware yes 
     bridge-ports swp1 swp2 swp48.400
     bridge-vids 400
     bridge-pvid 1
     bridge-stp on

auto swp1
iface swp1
     bridge-access 400

auto swp2
iface swp2
     bridge-access 400


auto swp48
iface swp48

auto swp48
iface swp48.400
---------
Thanks!
Photo of machiasiaweb

machiasiaweb

  • 930 Points 500 badge 2x thumb

Posted 2 years ago

  • 1
Photo of David Marshall

David Marshall, Employee

  • 530 Points 500 badge 2x thumb
Try this:

auto bridge
iface bridge
     bridge-vlan-aware yes  
     bridge-ports swp1 swp2 swp48
     bridge-vids 400
     bridge-pvid 1
     bridge-stp on
auto swp1
iface swp1
     bridge-access 400
auto swp2
iface swp2
     bridge-access 400
auto swp48
iface swp48 bridge-vids 1 400